Day 20 – Petal Palette Showcase – Embossed Gift Tag

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the twentieth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits.

IMG_5743

What a gorgeous little tag, to make it I used the Broadway Bound Designer Series Paper, and I cut this 2″ x 4″ I also used a piece of vellum that measured 2″ x 4″. I used the tag punch at the top of both pieces and then rounded the corners that were left.

I used versa mark ink to stamp the sporty design vertically down the right hand side of the vellum, and best wishes vertically again down the leg thank side. I sprinkles gold embossing powder over the vellum, and shook off the excess powder. I then used the heat gun to heat emboss the powder – The effect it simply stunning on vellum!

Using 15cms of the 1/8″ gold ribbon, I thread it through both of the tags, and back through itself.

I then added 3 black sequins form the assorted sequin pack with a little bit of tom bow.

I love how the gold is picked out on both pieces – GORGEOUS!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Links by TheseAreMyStamps.com

Day 19 – Petal Palette Showcase – Paperclips

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the nineteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits.

IMG_5734

I stamped the little bird, the large flower bundle, the smaller flower bundle and the individual flower onto whisper white with basic grey.

I then used the big shot to cut out my stamped images, as well as another set of die cuts which are left plan fr the reverse of the paperclips.

I then used my blender pens to colour in the flowers, leaves and the bird. I coloured in the flowers in real red, the leaves in garden green and the bird in soft suede with a real red belly!

I then used dimensionals to attach my paperclips to the stamps. Putting a dimensional on the plain side, inside the paperclip and one outside to stop it from moving around, then I put my coloured in stamp in the top and hey presto! A gorgeous decorative paperclip! Perfect for travellers notebooks, or to make organising more fun!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Blender Pens

£10.75
Big Shot

£102.00
Clear Block E

£11.00

Links by TheseAreMyStamps.com

Day 18 – Petal Palette Showcase – Memory Keeping

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the eighteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits.

IMG_5626

With facebook and social media, no-one prints out photographs like we used to in the olden days.

The notebook in this video I show you my travellers notebook from Websters Pages. I use this for memory keeping (the modern version of scrap booking)

The mini printer I use is a HP Sprocket, and I bought it from Amazon. It prints mini photographs on the go and they are stickers so easy to add to your notebook  – I just love it!

I used gorgeous Grape and Melon Mambo cardstock, and I stamped onto whisper white with basic grey. I can colour these in on the go when I get more time.

I then used the big shot to cut out some of the dies, and used them to decorate around my photos.

I also have a stash of foil stickers that look stunning and really add some bling to my spread.

if you haven’t got a travellers notebook already, get in touch, I have a selection of colours available, and am more than happy to help; you set it all up in gorgeousness!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

 

 

Day 17 – Petal Palette Showcase – Notebook & Envelopes

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the seventeenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner who wants to add a new dimension to their cards.

The dimensions & equipment used are as follows:

Jotter pads are from the range – 4 for £1 – BARGAIN

Measure 9.25 x 6″ in Basic Black card stock, then score the card at 4.5″ and 4.75″ along the long edge.

The pocket on the inside 5″ x 3″ and score at half an inch around 3 edges, on the 2 short edges and along one of long edges

Fold and burnish and then cut the corners out of, so that it can close flush onto the card.

In whisper white, measure 2.5 x 3.5″ which is the mat which will sit on top of your flap for the envelopes.

I used white embossing powder to decorate the front of the folder, and back embossing powder in the whisper white inside.

Using versa mark ink, stamp 2 of the rose bundle flower stamps into the corners, sprinkle the white embossing powder and shake to cover the sticky ink, then use the heat gun.

On the whisper white piece of car, stamp again using the versamark ink, the leaf stamp, and sprinkle black embossing powder this time, shake to cover the sticky ink, then use the heat gun.

Cut a 2.5″ circle out of the sparkle glimmer paper, and then a 2″ circle out of basic black, stamp onto the black in versa mark “from the heart” and sprinkle white embossing powder as you have before.

Put tombow glue around the 3 edges of your pocket and stick to the inside front cover.

Put 2 dimensionals onto the black circle and stick it to the glimmer paper, and then 2 dimensionals onto the glimmer per and add to the front cover.

Use tombow glue to stick the whisper white with the leaves to the pocket.

I also used tombow glue to stick the jotter to the inside of the back cover.

For your envelopes, I used basic black card again. The yardstick needs to measure 6.5″ x 6.5″ then using your envelope punchboard, punch and score at 2.75″, then line up with the score line and work your way around all 4 edges. Round the corners that are left. Fold and burnish. Stamp a little flower onto the flap of your envelope with versa mark, sprinkle white embossing powder and heat emboss.

Glue along 2 sides of the envelope and stick together.

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Links by TheseAreMyStamps.com

Day 16 – Petal Palette Showcase – I Just Love You

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the fifteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner who wants to add a new dimension to their cards.

IMG_5606

The dimensions & equipment used are as follows:

 

 

 

 

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Day 15 – Petal Palette Showcase – Z Card

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the fifteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner who wants to add a new dimension to their cards.

IMG_5580

The dimensions & equipment used are as follows:

1 x Card base measuring 10″ x 4- 1/8th” I did this in Mint macaron, score along the ling edge at 5″ and 2.5″

1 x  Petal Pink measuring 4-3/4″ x 3-3/4″ – This sticks onto what would be the inside of your card

I used blushing bride ink to stamp onto these before sticking it to the card, I used the decorative spots stamp across the bottom, and the small flowers in the top corners, and used the the “life is so much better with you in it” stamp in the middle.

2 x “Share What You Love” Designer Series Papers measuring 2″ x 3.5″ – stick both of these to the 2 petal pink pieces of card, make sure that you use the reverse side of the DSP on one of them

2 x Petal Pink measuring 2-1/4 x 3-3/4″ – once the DSP has been attached to these, you need to stick on to the small front panel of the card, and one on the adjacent panel behind it.

1 x Petal pink measuring 2.5″ x 2.5″ & 1 x Mint Macaron measuring 2″ x 2″, on the smaller square use the small flower bundle stamp to stamp in blushing bride in a repeating pattern, then stick the smaller square to the larger square.

This square then stick on the front panel of the card, with half hanging over, so ensure you only glue the half that needs to be stuck!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Links by TheseAreMyStamps.com

Day 14 – Petal Palette Showcase – Mini Card & Matching Envelope

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the fourteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner, because it is just simple stamping and colouring in – but the effect is stunning!

IMG_5579

The dimensions & equipment used are as follows:

For your envelopes you need to measure 5″ x 5″ in whisper white, for your cards measure 4″ x 3.5″ and then score at 2″ on the 4″ side.

Using the envelope punch board, punch and score at 2″, then line the score line up with the score guide, so this on all 4 sides. round the edges of the sharp corners using the punch board, and then fold and burnish the score lines you have just made.

I stamped in Basic Grey, on the inside of the small flap of the envelope and then on the front of the envelope I stamped on the bottom left hand corner.

On the cards I used the “Life is so much better with you in it” stamp, stamped one in the middle of the card, and one on the bottom right hand corner of the second card.

The card with white space on the right, using the same stamp as the envelope and stamp going over the edges. On the card where the sentiment is in the middle, use the longer floral stamp and stamp 3 times in top left hand corner and again on the bottom right hand corner.

I then used the blender pens top colour the flowers in Grapefruit Grove and the leaves in Call Me Clover.

The envelopes then need to be glued, and we are gluing these long ways. so fold the small bottom flap up, add glue and fold a long side in, add more glue and pull the other longer side in to stick.

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

tams# 23407

Product List

Bone Folder

£6.25
Blender Pens

£10.75

Links by TheseAreMyStamps.com

Day 13 – Petal Palette Showcase – Cake Toppers

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the thirteenth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner, who wants to do more than just stamping.

IMG_5547

The dimensions & equipment used are as follows:

I used Very Vanilla card stock, and punched 6 x circles with the 1 & 3/8″ punch (discontinued item), 6 x circles with the 1&3/4″ punch and 6 x banners using the big shot and the banner die.

now its time for stamping – I stamped using versa mark, I punched 3 birds onto the larger circles, 3 little flowers on the smaller circles and 3 congratulations on the banners. then sprinkle gold embossing powder over each of the elements, shake it around so it sticks to the ink, and then use the heat tool to finish the process.

I put 2 dimensionals on the reverse of the circle elements I had stamped, and 3 on the banners, I then pressed cocktail sticks into the dimensionals and covered it over using the plain elements. Voila!

I think these look SOOOOOOOO effective!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Big Shot

£99.00

Links by TheseAreMyStamps.com

Day 12 – Petal Palette Showcase – Bookmarks

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

This is the twelth project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner, who wants to do more than just stamping and wants to add layers to their projects.

IMG_5524

The dimensions & equipment used are as follows:

The measurements you need for the book mark is 2″ x 5.75″ – I did this in Basic Black, once measured out, use the Tag punch to give yourself a cute tag top. I then used the trio punch to round the corners on the bottom of the book mark. The floral mat measures at 1.5″ x 4.75″ on this project I used paper out of the share what you love series. Round the 4 corners of your mat. Stick the mat to the black tag using tombow glue.

I stamped a little birdie with versa mark, onto a piece of So Saffron card stock, and sprinkled black embossing powder, then heated it with the heat gun.

Run the bird through the big shot, as well as some basic black with the long leaf die.

Using the tombow glue, stick the long leaf die cut to the bookmark and the bird was stuck on with a dimensional.

Add 15cms of black half inch ribbon through the tag and bobs your uncle!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

tams# 23384

Product List

Big Shot

£99.00

Links by TheseAreMyStamps.com

Day 11 – Petal Palette Showcase – Canvas

For a full tutorial, head over to my YouTube Channel – even better subscribe so your alerted to the new projects I cover.

IMG_5520This is the eleventh project in the “Petal Palette Showcase” which shows you a different project every day for the month of June using only the Petal Palette Stamp Set & Petals & More Thinlits. I would recommend this project for a beginner, who wants to do more than just stamping and wants to add layers to their cards.

The dimensions & equipment used are as follows:

I purchased the canvas and easel from the range and they were a BARGAIN at £1.99

I used Basic Gray, Berry Burst, Lemon Lime Twist, Pineapple Punch

Stamp 4 of the flower stamps onto whisper white, using basic grey ink, using the big shot, punch out the flowers.

I used the blender pens to colour in the flowers and the leaves.

You will need 2 pieces of card, I used the pineapple punch card stock for the border which measures 4″ x 3.5″ and whisper white to stamp my decorative stamp and my sentiment onto which measures 3.5″ x 3″.

The sentiment I chose was “Life is so much better with you in it” Stamp this using the same colour as your matt in the centre of the whisper white, I used the spotty decorative stamp around the edge of the paper, again in the same colour, overlapping on the corners to cross over.

Stick the whisper white to the pineapple punch using 4 dimensionals, one in each corner, then the same on the pineapple punch to stick it to the canvass. I used 2 dimensioanls on each flower and stuck these on the corners so the overlapped the sentiment.

I absolutely love this project!

I REALLY HOPE YOU LOVE IT AS MUCH AS I DO!

Pop over again soon

Becky xx

Product List

Blender Pens

£10.75
Big Shot

£99.00

Links by TheseAreMyStamps.com